KINGSPAN K12 PDF

Click to download in a separate browser window. Celotex FR Celotex FR is ideal for external masonry wall that requires the benefits of increased fire resistance protection Product Installation - Kingspan K12 External Masonry — Timber Frame Wall with Insulating Sheathing K12 framing board should be fixed to the external surface of the timber frame structure outside of any OSB or plywood sheathing and restrained using temporary fixing in the form of large headed galvanised clout nails prior to being tied into the masonry leaf with an appropriate timber frame wall tie. Ensure that K12s are tightly butted and that any requirements of the timber frame manufacturer are met. Please contact the Kingspan Insulation Technical Service Department see contact information below for further information. Wall Ties — Timber Frame Wall The outer leaf of masonry may be constructed in the conventional manner using appropriate wall ties to restrain the two wall skins together.

Author:Kazirg Kigazshura
Country:Azerbaijan
Language:English (Spanish)
Genre:Medical
Published (Last):9 January 2017
Pages:253
PDF File Size:17.31 Mb
ePub File Size:5.30 Mb
ISBN:336-4-49374-469-3
Downloads:20526
Price:Free* [*Free Regsitration Required]
Uploader:JoJotilar



Click to download in a separate browser window. Celotex FR Celotex FR is ideal for external masonry wall that requires the benefits of increased fire resistance protection Product Installation - Kingspan K12 External Masonry — Timber Frame Wall with Insulating Sheathing K12 framing board should be fixed to the external surface of the timber frame structure outside of any OSB or plywood sheathing and restrained using temporary fixing in the form of large headed galvanised clout nails prior to being tied into the masonry leaf with an appropriate timber frame wall tie.

Ensure that K12s are tightly butted and that any requirements of the timber frame manufacturer are met. Please contact the Kingspan Insulation Technical Service Department see contact information below for further information. Wall Ties — Timber Frame Wall The outer leaf of masonry may be constructed in the conventional manner using appropriate wall ties to restrain the two wall skins together. The ties should be inserted whilst constructing the outer leaf ensuring a slight offset is achieved, sloping the tie downwards towards the outer leaf.

Wall Ties — Steel Frame Wall Advice should be sought from the appropriate steel frame manufacturer for recommendations of a suitable wall tie specification. This should coincide with board thickness, allowing the K12FramingBoardtofinishflushwith the outside surface of the timbers. Insulation boards that have been individually cut to fit the stud spacings may be temporarily held to the battens with large headed clout nails.

An additional restraint to the boards will be provided by a plasterboard lining fixed to the inside face of the timbers. When utilising K12 between studwork, the plasterboard lining should be of the vapour check type or a separate polythene vapour control layer used.

Ensure there is a tight fit between K12 framing board and the adjoining structure. Fill all gaps with expanding urethane sealant. Attach appropriate wall ties to frame at spacings required for the masonry external leaf.

Fix Kingspan Kooltherm K12 Framing Board to the external surface of the frame structure ensuring vertical board joints coincide with a vertical member. Ensure that the boards are lightly butted and continuity of insulation is maintained. Use large headed galvanised clout nails or screws as fixings prior to the insulation boards being tied to the frame with an appropriate timber frame wall tie and insulation retaining disc. Ensure that fixings are coincident with the underlying timber studs, top and bottom wall plates.

Construct the outer leaf of masonry in the conventional manner, using appropriate wall ties to hold the two wall leaves together. This should coincide with board thickness, allowing the K12 to finish flush with the inside surface of the timbers. A breathable membrane such as Dupont Tyvek Supro is applied over the insulation boards and temporarily stapled or pinned in place.

Preservative treated softwood counter—battens are fixed vertically to the wall structure at mm centres. The timber boarding system is then fixed to the counter—battens. The counter—battens should be fixed at centres to coincide with the timber frame wall studs.

Application advice should be sought from the appropriate membrane manufacturer. Telephone: - Fax: Email: info kingspaninsulation.

CESUR ZTRK BUILDING SKILLS FOR PROFICIENCY CEVAP ANAHTAR PDF

120mm Kingspan Kooltherm K12 Framing Board (pack of 2)

.

VANNIYAR PURANAM PDF

Kingspan k12 Kooltherm Insulation – All sizes

.

Related Articles